Why Is Aluminum’s Melting Point Relatively Low?
At a glance
- 1. Check the reference point
Pure aluminum melts at about 660 °C, or 933 K, at standard pressure.
- 2. Compare the right properties
Melting depends on the free-energy difference between solid and liquid, not just the strength of solid-state bonding.
- 3. Consider its bonding
Aluminum has metallic bonding, but lacks the especially strong d-electron bonding found in many high-melting transition metals.
- 4. Check calculations carefully
A reliable theoretical melting point requires solid and liquid free energies, including thermal effects.
Pure aluminum melts at about 660 °C (933 K) at standard pressure. That is low beside tungsten, iron, or copper, but close to magnesium’s melting point and typical of several metals without strongly bonding transition-metal d electrons. The apparent surprise often comes from treating valence-electron count as a direct measure of melting point.
The key is that melting does not require separating every atom from its neighbors. Liquid aluminum remains a cohesive metallic liquid. Its melting temperature reflects the difference in free energy between the solid and liquid phases, not the total strength of all the bonds in the solid.
What sets the melting temperature?
At the melting point, the solid and liquid have equal Gibbs free energy. In a simplified description at fixed pressure,
where and are the enthalpy and entropy changes on melting. The enthalpy measures the energy cost of transforming the solid into liquid; the entropy measures the extra disorder of the liquid.
For aluminum, the enthalpy of fusion is about 10.7 kJ/mol and the entropy of fusion is about 11.5 J/(mol·K). Their ratio is approximately
consistent with the observed melting point of about 933 K. The estimate also shows why melting temperature cannot be read directly from a simple claim such as “more valence electrons means stronger bonds.” Both the energy and entropy changes matter.
Why aluminum is not a high-melting metal
Aluminum has three valence electrons per atom and forms a face-centered-cubic (fcc) metal at ordinary conditions. Its electrons are delocalized, producing metallic cohesion. But the number of valence electrons alone does not determine the melting point: the electronic structure, crystal structure, and relative stability of the liquid all contribute.
Many transition metals have partially filled d bands that contribute strongly to cohesion. This often makes their solids difficult to melt, although the trend is not universal and melting points depend on more than cohesive energy. Aluminum’s bonding is primarily metallic, with its valence electrons spread through the solid; it does not gain the same kind of strong d-band cohesion characteristic of many transition metals.
Nor does an fcc crystal structure guarantee a high melting point. Crystal packing describes how atoms are arranged, but it does not by itself specify how much more stable that arrangement is than the liquid. At melting, aluminum atoms lose long-range crystalline order while remaining close together and metallically bonded.
| Substance | Approximate melting point | Comparison |
|---|---|---|
| Magnesium | 650 °C | Close to aluminum |
| Aluminum | 660 °C | Reference value for pure metal |
| Copper | 1,085 °C | Higher-melting metal |
| Iron | 1,538 °C | Much higher-melting transition metal |
| Silicon | 1,414 °C | High-melting covalent-network solid |
The comparison with silicon is especially useful: silicon has a directional covalent network, so melting disrupts a different kind of structure than it does in a metal. A higher melting point does not simply mean “more bonds” or “more electrons”; it reflects the phase-specific energy and entropy balance.
Do not confuse aluminum with alumina
Aluminum metal and aluminum oxide are different substances. Aluminum oxide, Al₂O₃, has a much higher melting point (roughly 2,070 °C) because it is a strongly bound ionic and covalent solid. The high melting point of the oxide does not imply that the elemental metal should also melt at a high temperature.
If a calculation predicts an even lower value
A static, zero-temperature calculation of the crystal’s energy or cohesive energy does not, by itself, determine the melting point. To predict melting, you need to compare the free energies of solid and liquid aluminum at finite temperature. That generally requires accounting for thermal vibrations in the solid, atomic motion in the liquid, and the entropy of both phases.
If a computed result is far below 933 K, check whether it is actually a melting-point calculation or only an estimate based on a solid-state energy. Also check the exchange-correlation approximation, pseudopotential or basis set, finite-size effects, and how the liquid free energy was obtained. A method can describe the solid’s ground-state properties reasonably well without giving an accurate solid–liquid free-energy difference.
Common mistakes
- Using valence count as a melting-point rule. More valence electrons do not guarantee a higher melting point.
- Equating cohesive energy with enthalpy of fusion. Cohesive energy concerns separating atoms into isolated atoms; melting leaves a dense, cohesive liquid.
- Assuming crystal packing sets the melting point. Packing matters, but the stability of the liquid and its entropy matter too.
- Comparing different materials or conditions. Pure aluminum’s value is not the melting point of an alloy, an oxide, or aluminum under high pressure.
References
- CRC Handbook of Chemistry and Physics
- N. W. Ashcroft and N. D. Mermin, Solid State Physics
- M. W. Chase, NIST-JANAF Thermochemical Tables
Spotted an error? Send a correction. Read how we write and check articles in our editorial policy.