What Defines Incomplete Combustion?
At a glance
- 1. Check the products
Incomplete combustion leaves some fuel elements less fully oxidized, often producing carbon monoxide or soot instead of only carbon dioxide.
- 2. Compare with complete burning
For a hydrocarbon, complete combustion ideally produces carbon dioxide and water.
- 3. Identify the conditions
Limited oxygen, poor mixing, low temperature, or short reaction time can prevent full oxidation.
- 4. Balance the actual reaction
Write an equation for the products formed; incomplete combustion has no single universal equation.
Incomplete combustion occurs when a fuel burns but is not fully oxidized. For a hydrocarbon, this means that some of its carbon may end up as carbon monoxide or solid carbon (soot) instead of all becoming carbon dioxide. The exact products depend on the fuel and the conditions, so there is no single equation that represents every incomplete combustion reaction.
What counts as incomplete combustion?
Combustion is a chemical reaction in which a fuel reacts with an oxidizer, usually oxygen. In complete combustion of a hydrocarbon, enough oxygen is available and the reaction proceeds far enough that the carbon forms carbon dioxide and the hydrogen forms water. For example, complete combustion of methane is represented by:
If the fuel’s carbon instead forms carbon monoxide, or remains as carbon particles, the combustion is incomplete. In real flames, products can be mixed: a fire may produce carbon dioxide, carbon monoxide, water, and soot at the same time. The presence of some carbon dioxide does not rule out incomplete combustion.
The definition is about the products and extent of oxidation, not simply whether a flame looks smoky or whether oxygen is completely absent. A smoky flame is a warning sign of soot, but incomplete combustion can also produce invisible carbon monoxide. Conversely, visible smoke can contain material other than soot.
Why does it happen?
A common cause is too little oxygen relative to the amount of fuel. The oxygen may be limited overall, or it may fail to reach parts of the fuel. Other conditions can also interrupt complete oxidation:
- Poor mixing: fuel and oxygen do not meet evenly, leaving fuel-rich regions.
- Low temperature: reactions that convert carbon monoxide and other intermediates to more oxidized products may proceed too slowly.
- Short reaction time: gases may leave a hot reaction zone before oxidation is complete.
- Fuel-rich operation: a burner or engine supplies more fuel than the available oxygen can completely oxidize.
These factors often occur together. Supplying excess air can help, but it does not guarantee complete combustion if mixing or temperature is poor.
A balanced example with methane
One possible incomplete-combustion reaction makes carbon monoxide and water. Its balanced equation is:
Check the atom counts: both sides contain 2 carbon atoms, 8 hydrogen atoms, and 6 oxygen atoms. Per mole of methane, this reaction uses 1.5 moles of oxygen and produces carbon monoxide. Complete combustion requires 2 moles of oxygen per mole of methane:
Another possible outcome is soot, which is elemental carbon. A balanced idealized equation for that pathway is:
This equation is also atom-balanced, but it is not a prediction that soot will be the only carbon product in a real flame. Actual combustion usually involves several reactions and may yield a mixture of products.
How to write an incomplete-combustion equation
For a stoichiometry problem, use the products specified in the question. If none are specified, state your assumption; different plausible products give different balanced equations.
For example, suppose the stated products from propane combustion are carbon monoxide and water. Start with the unbalanced reaction:
Balance carbon and hydrogen first: one propane molecule gives three carbon monoxide molecules and four water molecules. Those products contain seven oxygen atoms in total, so the reactants need oxygen molecules. Multiplying every coefficient by 2 gives whole numbers:
This is balanced, and it describes one specified incomplete-combustion pathway. It is not the only possible reaction for propane. If the products were instead carbon dioxide and water, the equation would describe complete combustion:
Common mistakes
- Defining it only as “not enough oxygen”: oxygen shortage is common, but the defining clue is incomplete oxidation in the products. Poor mixing, low temperature, or short reaction time can cause incomplete products even when oxygen is present.
- Assuming all carbon becomes carbon monoxide: soot and mixtures of carbon monoxide and carbon dioxide are also possible.
- Treating one equation as universal: a balanced equation depends on the fuel and the products being modeled.
- Thinking incomplete combustion means no combustion: the fuel is reacting and releasing energy; it simply does not all reach the most fully oxidized products.
- Ignoring the hazard: carbon monoxide is poisonous and cannot be detected by sight or smell. Incomplete combustion should not be treated as a safe or useful way to burn fuel.
References
Spotted an error? Send a correction. Read how we write and check articles in our editorial policy.