Ph · Physics

How Are Velocity and Radius Related in Circular Motion?

Published By the 9to5Science editorial team

At a glance

  1. 1. Use the circular-motion relation

    For speed v on a path of radius r, the inward acceleration has magnitude v squared divided by r.

  2. 2. Identify what stays fixed

    Radius alone does not determine speed; the relationship depends on whether speed, angular speed, force, or acceleration is held constant.

  3. 3. Apply the condition

    Use the relevant equation to compare the motion before and after the radius changes.

  4. 4. Check the direction

    Velocity points tangent to the path, while centripetal acceleration points toward the center.

The relationship between velocity and radius in circular motion is not a single rule saying that one always increases or decreases with the other. The key equation is the centripetal-acceleration relation, and the result depends on what other quantity is kept fixed.

Here, “velocity” is often used informally to mean speed, the magnitude of velocity. The velocity vector itself points tangent to the circular path; the radius points from the center toward the object, so they are perpendicular.

The basic relationship

For an object moving on a circle of radius rr with speed vv, the inward (centripetal) component of its acceleration has magnitude

ac=v2r.a_c = \frac{v^2}{r}.

If the object has mass mm, Newton’s second law gives the required net inward force:

Fc=mac=mv2r.F_c = m a_c = \frac{mv^2}{r}.

These equations relate speed and radius to acceleration and force. They do not determine a unique speed from a radius alone. You must also know something about the motion or the forces acting on the object.

What changes when the radius changes?

The most common comparisons are:

Quantity held fixedRelationshipEffect of increasing radius
Speed vvac=v2/ra_c = v^2/rCentripetal acceleration decreases
Angular speed ω\omegav=ωrv = \omega rSpeed increases in proportion to radius
Centripetal acceleration aca_cv=acrv = \sqrt{a_c r}Speed increases with the square root of radius
Inward force FcF_c and mass mmv=Fcr/mv = \sqrt{F_c r/m}Speed increases with the square root of radius

Angular speed describes how quickly the radius turns, in radians per second. Since one revolution covers a distance of 2πr2\pi r, a larger circle requires a larger linear speed to complete each revolution in the same time. That is why v=ωrv = \omega r when angular speed is fixed.

By contrast, if speed stays constant, an object on a wider circle turns less sharply. Its inward acceleration, v2/rv^2/r, is smaller.

Worked example: doubling the radius

Suppose a car travels around a circular track at a constant speed of 12 m/s12\ \text{m/s}. Compare its centripetal acceleration on tracks with radii of 30 m30\ \text{m} and 60 m60\ \text{m}.

For the smaller track,

a1=(12 m/s)230 m=4.8 m/s2. a_1 = \frac{(12\ \text{m/s})^2}{30\ \text{m}} = 4.8\ \text{m/s}^2.

For the larger track,

a2=(12 m/s)260 m=2.4 m/s2. a_2 = \frac{(12\ \text{m/s})^2}{60\ \text{m}} = 2.4\ \text{m/s}^2.

The radius doubled while the speed stayed the same, so the centripetal acceleration halved. For the same car, the net inward force also halves because Fc=macF_c = ma_c and the mass is unchanged.

Now consider a different condition: suppose the car keeps the same angular speed instead. Then v=ωrv = \omega r, so doubling the radius doubles the speed. The acceleration becomes ac=ω2ra_c = \omega^2 r, which also doubles. The two outcomes differ because the condition held fixed is different.

Speed versus velocity direction

In uniform circular motion, the speed is constant, but the velocity is not constant: its direction continually changes. That change in direction is why the object accelerates even when its speed does not change. The acceleration points toward the center of the circle, while the instantaneous velocity points along the tangent.

If the speed also changes, there is an additional tangential acceleration component. The centripetal relation v2/rv^2/r still describes the inward component; it is not, by itself, the object’s entire acceleration in nonuniform circular motion.

Common mistakes

  • Saying that a larger radius always means a larger speed. This is true if angular speed is fixed, but not if speed is fixed.
  • Saying that a larger radius always means a smaller speed. The inverse-radius relationship applies to centripetal acceleration at fixed speed, not to speed itself.
  • Confusing speed with velocity. Speed is a magnitude; velocity includes direction. In circular motion, direction changes continuously.
  • Treating centripetal force as an extra force. “Centripetal” describes the net inward force required for circular motion. It may be provided by tension, friction, gravity, or a combination of forces.
  • Using the equation without checking units. In v2/rv^2/r, speed squared divided by length has units of acceleration: (m/s)2/m=m/s2(\text{m/s})^2/\text{m} = \text{m/s}^2.

To answer a specific velocity–radius question, first identify which quantity is fixed or supplied. Then use ac=v2/ra_c=v^2/r, Fc=mv2/rF_c=mv^2/r, or v=ωrv=\omega r as appropriate.

References

  1. OpenStax, University Physics Volume 1, Section 6.2: Uniform Circular Motion

Spotted an error? Send a correction. Read how we write and check articles in our editorial policy.